71 Chevelle Trans Cooler Line Routing. Web found a way to mount and run my cooler lines. Web got a question about routing cooler lines.
Mine wiggle a lot and are supported in one place by a plastic wire tie. I really don’t want to. Passenger side is the inlet coming.
The One On The Drivers Side Goes To The Trans.
I bent my own on two cars, both b bodies with headers. I just installed a transmission cooler (mounted sideways) and routed the new lines from the bottom fitting (outlet) on. Once you’ve made the cut you’ll see.
I Ran Bulkhead Fittings Through My Side Baffle Panels.
I don’t have the radiator back in but i do have the headers and starter motor in. I really don’t want to. I’m having a bit of trouble routing the lines, though.
Web 1 Reply Kasekenny Mechanic 18,907 Posts No Problem.
Web use a thick plate of steel or aluminum on the floor, set the hose in place, square off with the chisel and hit it hard, one time. 1965 chevelle powerglide transmission vacuum lines. Mine wiggle a lot and are supported in one place by a plastic wire tie.
The Top Line Is The Line That The Fluid Goes Into The Cooler.
That means the aid cooler right? Passenger side is the inlet coming. Web does anyone out there have a picture or reference that will show me the safest routing of the steel trans cooler lines from a th350 to the radator?
Ctv6501 | Manufacturer Part #:
Web yes it does say to cooler and from cooler. Web i am wondering if someone has good pictures that show the routing of the trans cooler lines. Plus i routed through the original radiator cooler to the trans.