Behringer X32 Aes50 Routing. On the x32, press the setup button and use encoder 2 to select a sample rate. Web aes50 a port (48 input/48 output) aes50 b port (48 input/48 output) expansion card inputs & outputs;
Here you will find all the bus sends available on your x32. Card out/card in = xuf firewire/usb card, (or future expansion cards). Web this could be any of the x32’s physical xlr inputs (local), digital stage box inputs (aes50 a or b), card inputs, or auxiliary inputs.
Connect To Stage Boxes And Personal Mixers Since You Can Connect A Range Of Compatible Devices, Like Stage Boxes Or Dp48/Wing/X32 Mixers, The Three Aes50 Ports Can Accommodate A Lot Of Different Configurations.
As you can see in this screenshot of the routing options, they are in blocks of 8. The ultranet connection is for connection p16 personal mixers. Aes50 = s16 or digital split via aes50 to/from another x32.
Web The Snippet To Get Inputs And Outputs From Aes50A Would Look Like This:
Web aes50 a port (48 input/48 output) aes50 b port (48 input/48 output) expansion card inputs & outputs; Web the solution to your setup is to configure the interconnectivity with the m32c in between the x32 producer and the s32. Card out/card in = xuf firewire/usb card, (or future expansion cards).
Web Press The Library Menu Button.
Name and save your snapshot/routing settings. The build process of the ethercon connector. Web in this video segment we show you input routing options when using the behringer x32 digital mixing console.
More Info Further Down The Article In The User In Routing Tab Overview.
Use encoder 2 to choose and select internal. Web the first page of the routing menu is where you choose which inputs the x32 will route to the 32 input channels, (in banks of 8). Local = internal mic preamp on back of console.
Route Your 32 Input Channels From Your X32Rack To The First 32 Channels On Your Aes50A Tab.
Here you will find all the bus sends available on your x32. To connect your mics, and speakers over a single ethernet. When routing audio, the layer up/down keys do not need to be used.